Original parts for the Skyline Hakosuka C10

2024年8月23日 2024年8月23日

ccnagoya

When we are restoring vehicles, we pay special attention to parts that often need replacing.
When these parts are no longer available, we create our own perfect replacement parts from new steel.
When replacing the steel on your vehicle you'll need a welder to properly attach these replacement pieces.
During installation, if there are any points you are unsure about please feel free to contact us at any time!

Products may be sold in-store and may be used by our company.
Inventory is subject to change, so please be sure to check stock before purchasing.
Purchases and orders can be made in-store or by mail order.
Additional shipping charges will be incurred when purchasing by mail order.
Made-to-order parts usually take 2 to 4 weeks.

To purchase, please contact us by email.

ccnagoya@gmail.com

○ => In stock　
△ => Few reamaining　
× => On back order (we'll inform you of the scheduled date)
☆ => Special order work (takes approximately 2 to 4 weeks depending on current work load)
When you want to buy parts, please ask us that stock.

stock : ☆

GT-R type grill net

It is for later model grill.
Made in Japan.
It can put for GT, GT-X or 1500/1800 model grill frame.
Price : 1Set 35,200 yen (include tax)

stock : ○

Rocker panel for 2Dr (120 cm)

This is the section of body located just under the doors (on the passenger side, it's where your chassis number is stamped).
As this part of the body is the closest to the ground, it is often the first to succumb to rust. Each piece is made to a length of approximately 120 cm, matching the required length for a 2 door Hakosuka.
For a 4 door Hakosuka, one side will require one and a half of these. Naturally we can cut these to the length required.
Price : 1 piece 21,560 yen
Common for left and right

stock : ○

Rocker panel for 4Dr (180 cm)

This is the section of body located just under the doors (on the passenger side, it's where your chassis number is stamped).
As this part of the body is the closest to the ground, it is often the first to succumb to rust. Each piece is made to a length of approximately 180 cm, matching the required length for a 4 door Hakosuka.
Naturally we can cut these to the length required.
Price : 1 piece 28,600 yen
Common for left and right

stock : ○

Rocker panel inner for 2Dr (150cm)

This is the inner frame located behind the rocker panels (on the passenger side, it's where your chassis number is stamped). When the rocker panels rust out, this piece often rusts with it. Replacing these along with the rocker panels can give your rare Skyline a very long rust free life!
Price : 1 piece 21,780 yen
Common for left and right

stock : ○

Rocker panel inner for 4Dr (180cm)

stock : ☆

Front member

This is the front frame member located the very front of the engine bay. Each piece is perfectly bent into shape by hand. Definitely a part worth changing if doing a full restoration!
Price : 1 peace 74,800 yen

stock : ○

Front Bumper Bracket (Right)(left)

These are new hand made brackets that attach to the front member and are used for installing the front bumper.
Price : L/R individual 20,020 yen

stock : ○

Front Frame top (Right)(left)

New hand made pieces for the front of the frame members in the engine bay. These pieces greatly contribute to helping strengthen up the frame and bring it back to new quality.
Price : L/R individual 20,020 yen

stock : ○

Bottom side of the door

New steel for the bottom part of the doors. Often only the bottom part of the doors rust out, so this is a great piece for bringing doors back to perfection without having to find a replacement door.
Price : 1 peace 16,940 yen

stock : ☆

Engine room side cover (Right)(left)

Rainwater tends to collect around this area causing it gain little holes of rust. Each piece is bent perfectly to shape by hand!
Price : L/R individual 23,760 yen

stock : ☆

Front floor box (Right)(left)

Water tends to collect in this place, often leading to not only this part rusting out but also the floor panel.
When combined with other new steel around this area it can make a commonly rusted section of your Skyline stronger, better and safer than it was when it was new!
Each piece is bent perfectly into shape by hand.
Price : L/R individual 23,760 yen

stock : ☆

Lower fender section (Right)(left)

This is replacement steel for the rear lower section of the front fender.
Just simply cut the rusty bit off and weld on the new piece.
Each piece is painstakingly bent into perfect shape by hand so installation is greatly simplified!
Price : L/R individual 23,100 yen

stock : ☆

Rear Lower fender section (Front side of tire house) 2Dr.

This is replacement steel for the front lower section of the rear fender.
Just simply cut the rusty bit off and weld on the new piece.
Each piece is painstakingly bent into perfect shape by hand so installation is greatly simplified!
Price : L/R individual 26,400 yen

stock : ☆

Rear Lower fender section (Rear side of tire house) 2Dr.

This is replacement steel for the rear lower section of the rear fender.
Just simply cut the rusty bit off and weld on the new piece.
Each piece is painstakingly bent into perfect shape by hand so installation is greatly simplified!
Price : L/R individual 26,400 yen