When we are restoring vehicles, we pay special attention to parts that often need replacing.
When these parts are no longer available, we create our own perfect replacement parts from new steel.
When replacing the steel on your vehicle you'll need a welder to properly attach these replacement pieces.
During installation, if there are any points you are unsure about please feel free to contact us at any time!
| Parts name/comments | stock |
| GT-R type grill net "New item"
It is for later model grill.
Made in Japan.
It can put for GT, GT-X or 1500/1800 model grill frame.
Price : 1Set 34,560 yen (include tax)
↓
We are now accepting a limited number of orders at 30,240 yen (include Tax) |
- |
| Dash panel cover "New item"This is put on the dash panel that was torn. You don't have to remove old dash panel.
Saface material is fake leather. Speaker hole material is FRP.
Price : Don't have the speaker hole 34,560 yen
Added the speaker hole 41,040 yen |
☆ |
| Clear light cover(Left/Right set)High quality headlight covers from clear plastic Installation is incredibly simple, requiring only one screwdriver!
We can also make up some custom colored covers as well!
Give your Skyline a classy look!
Only reamaining
Price : Left/Right set 30,240 yen |
× |
| Rocker panelThis is the section of body located just under the doors (on the passenger side, it's where your chassis number is stamped).
As this part of the body is the closest to the ground, it is often the first to succumb to rust. Each piece is made to a length of approximately 120 cm, matching the required length for a 2 door Hakosuka.
For a 4 door Hakosuka, one side will require one and a half of these. Naturally we can cut these to the length required.
Price : 1 piece 19,008 yen |
○ |
| Rocker panel innerThis is the inner frame located behind the rocker panels. When the rocker panels rust out, this piece often rusts with it. Replacing these along with the rocker panels can give your rare Skyline a very long rust free life!
Price : L/R individual 19,440 yen |
○ |
| Front memberThis is the front frame member located the very front of the engine bay. Each piece is perfectly bent into shape by hand. Definitely a part worth changing if doing a full restoration!
Price : 1 peace 64,800 yen |
☆ |
| Bumper Bracket (Right)(left)These are new hand made brackets that attach to the front member and are used for installing the front bumper.
Price : L/R individual 17,820 yen |
○ |
| Frame top (Right)(left)New hand made pieces for the front of the frame members in the engine bay. These pieces greatly contribute to helping strengthen up the frame and bring it back to new quality.
Price : L/R individual 17,820 yen |
○ |
| Bottom side of the doorNew steel for the bottom part of the doors. Often only the bottom part of the doors rust out, so this is a great piece for bringing doors back to perfection without having to find a replacement door.
Price : 1 peace 15,120 yen |
○ |
| Engine room side cover (Right)(left)Rainwater tends to collect around this area causing it gain little holes of rust. Each piece is bent perfectly to shape by hand!
Price : L/R individual 19,440 yen |
2Set |
| Front floor boxWater tends to collect in this place, often leading to not only this part rusting out but also the floor panel.
When combined with other new steel around this area it can make a commonly rusted section of your Skyline stronger, better and safer than it was when it was new!
Each piece is bent perfectly into shape by hand.
Price : L/R individual 19,440 yen |
☆ |
| Lower fender sectionThis is replacement steel for the rear lower section of the front fender.
Just simply cut the rusty bit off and weld on the new piece.
Each piece is painstakingly bent into perfect shape by hand so installation is greatly simplified!
Price : L/R individual 19,008円 |
☆ |
| Rear Lower fender section (Front side of tire house) 2Dr.This is replacement steel for the front lower section of the rear fender.
Just simply cut the rusty bit off and weld on the new piece.
Each piece is painstakingly bent into perfect shape by hand so installation is greatly simplified!
Price : L/R individual 21,384円 |
☆ |
| Rear Lower fender section (Rear side of tire house) 2Dr.This is replacement steel for the rear lower section of the rear fender.
Just simply cut the rusty bit off and weld on the new piece.
Each piece is painstakingly bent into perfect shape by hand so installation is greatly simplified!
Price : L/R individual 21,384円 |
☆ |
| Tow hooks
Price : 1Set 19,440 yen |
☆ |
| Bolts set of door hinges 2 doors left/right set or 4 door front left/right set
Price : 1Set 6,048 yen |
△ |
| Bolts set of door hinges4 soors rear left/right set
Price : 1Set 5,724 yen |
△ |
| Bolts set of cowl top cover
price : 1Set 2,160 yen |
△ |
| Bolts and nuts set of tail light rimbolts, nuts, packing wahsers
Price L/R individual 1,620 yen |
△ |
| Parts name/comments | stock |
| 240ZG style overfendersThese are very classic 240 ZG style overfenders that mount directly to the factory fenders.
These fenders distort very little making installation a breeze!
Constructed of black FRP.
Set of 4 covering all four fenders.
Price : vehicle (front and rear L/R set) 28,080 yen |
○ |
| Rocker panel (Right)(left)With its curved shape, water gets trapped here easily, often leading to rotting and rusting.
Price : L/R individual 19,008 yen |
△ |
| Rocker panel front cection (Right)(left)
Price : L/R individual 24,840 yen |
☆ |
| Zenki (early model) floor panel (Right)(left)These parts can only be used on the Zenki (early model) S30 Zs and 240 Zs.
Unfortunately, they cannot be used for the Kouki (late model) models.
These are parts are made using particularly thick steel, ensuring both strength and a long life!
Price : L/R individual 64,800 yen |
☆ |
| Floor frame member (Left and right set)The is the frame piece that attaches to the bottom side of the floor.
One per side. lenght is
Price : 1 piece 7,560 yen |
△ |
| Lower fender sectionThis is new steel for the back part of the front fenders from the press line down.
These pieces are bent perfectly into shape by hand, greatly simplifying installation.
Price : L/R individual 19,008 yen |
☆ |
| Rear Lower fender sectionThis is replacement steel for the front lower section of the rear fender.
Just simply cut the rusty bit off and weld on the new piece.
Each piece is painstakingly bent into perfect shape by hand so installation is greatly simplified!
Price : L/R individual 24,840 yen |
☆ |
This is universal weatherstripping for doors, trunks, etc. They have a metal core for rigidity can snap around the metal seams of the vehicle.(Expect No.5)
Naturally, as these are universal type weatherstippings, there are some cars in which these will not work.
Please supply us with how much (in length) of these you would like when ordering.